The role of LED garden lights, and what are the characteristics Blog

The role of LED garden lights, and what are…

LED garden lights is a kind of outdoor lighting, usually refers to outdoor road lighting below 6 meters. LED garden lights have the characteristics of diversity, beauty, beautification and decoration of the environment, also known as landscape garden lights.

UFO Gargen light

The role of LED garden lights:

With the development of LED garden light in the 21st century, they are widely used in urban slow lanes, narrow lanes, residential areas, tourist attractions, parks, squares, private gardens, courtyard corridors and other public places for one-sided or two-volume road lighting to improve night travel safety. Increase the time of outdoor activities and improve the safety of life and property.

It can also change people’s moods, improve people’s moods, change people’s concepts and create a light and dark swatch of night. During the day, garden lights can decorate the city scenery;

At night, garden lights can not only provide necessary lighting and life convenience, increase the sense of security of residents, but also highlight the highlights of the city and interpret the beautiful style, thus developing into a mature industrial chain.

So where to find high-quality LED garden light?

New Sunshine’s LED garden lights are not only of excellent quality, but also low in price. They are the best choice for LED garden lights.

LED Garden light

New Sunshine LED Garden Lights Features:

1. Robustness, low boiling point of aluminum, strong flexibility, high stability, strong support, wind resistance of 36km/s, and shock resistance of 8.8 or higher.
2. Garden lights’ cast aluminum has the advantages of complex production process, high-quality materials and peculiar shapes.
3. The process, cast aluminum and cast iron processes are much more complicated than steel, and the analysis is conducted with aluminum as the theme. First, the aluminum is fired into liquid, and then shaped by a special abrasive tool. Various patterns will be engraved on the aluminum rod in the middle, and then galvanized and sprayed after drying.

Want to learn more? please check:

What are the high quality features of New Sunshine LED Corn Light?

What LED Fishing Lights Are Good? Wholesale high quality fishing lights

Problems with led lights? Why is the led light not on? Blog

Problems with led lights? Why is the led light…

Led courtyard lights are mainly used for outdoor lighting in urban slow lanes, narrow lanes, residential areas, tourist attractions, parks, squares and other public places. Because LED  lights are versatile and beautiful, they can beautify and decorate the environment, so they can be seen everywhere in landscape lighting projects. The more led garden lights are used, the more problems will appear, and the reasons for their failures are diverse, and the editor will explain them one by one now.

The main reason for the failure of led courtyard lights is poor construction quality, which is mainly reflected in five aspects:

  • The depth of the cable trench is not enough, and the sand-covering bricks are not constructed according to the standards;
  • The production and installation of the aisle pipe did not meet the requirements, and the two ends were not made into horns according to the standard; third, the cable was dragged on the ground when laying the cable; fourth, the foundation embedded pipe was not constructed according to the standard; Because the thickness of the wire nose crimping and insulation wrapping is not enough, it will short-circuit between phases after a long time of operation.
  • The material is not off. From the perspective of the failures handled in recent years, the low quality of the courtyard lamp material is also very relevant. The main manifestation is that the wire contains less aluminum, the wire is relatively hard, and the insulation layer is thin. These three situations have occurred more frequently in recent years. To
  • The quality of supporting projects is not good for hard garden lights and cables are generally laid on the sidewalk. The construction quality of sidewalks is now getting worse and worse, leading to ground subsidence and deformation of cables, especially in the northeast area in the high-cold zone. The advent of winter makes the cables and soil form a whole. Once the ground subsides, the courtyard The bottom of the lamp foundation will be strained, and when there is a lot of rain in summer, the foundation root will be burnt.
  • The unreasonable design is one aspect of overload operation. With the continuous development of urban construction, courtyard lights continue to extend to various places. When new courtyard lights are built, which courtyard lights are close to, which loop is connected. In addition, the advertising industry has developed rapidly in recent years, and the advertising load is also connected accordingly. In the courtyard lamp, the load of the courtyard lamp is too large, the cable is overheated, the wire nose is overheated, the insulation is reduced, and the grounding short circuit occurs; on the other hand, the pole design only considers the situation of the pole itself, ignoring the space of the cable head After the cable heads are wrapped, most of them cannot even close the door. Sometimes the cable length is not enough and the joints do not meet the requirements. This is also a factor causing the failure. _

The solution：

  1. Be careful of silicone grease polluting the surface of the lamp body, surrounding objects and human body. Fixing the lamp board Place the lamp boards coated with silicone grease on the bottom of the lamp housing one by one, so that the two screw holes of each lamp board are aligned with the corresponding fixing holes of the lamp housing. Fix it with M3X5 round head Phillips stainless steel screws. To
  2. The installation direction of the lamp board is required to be consistent, and the arrangement is neat, avoiding uneven or gaps in the reflector. To
  3. The screws should be tightened. Welding the wires: Take the finished wires, the red wire to the positive pole and the black wire to the negative pole. Use a soldering iron to weld all the light boards in parallel. To
  4. Power-on trial operation After the lamps have been installed and passed the insulation test, the power-on trial operation is allowed. After power on, check and patrol carefully to check whether the control of the lamp is flexible and accurate; whether the switch corresponds to the control sequence of the lamp, if any problem is found, the power should be turned off immediately to find the cause and repair it.

Want to learn more? please check:

 Why is the led corn light brand pure natural and environmentally friendly?
LED corn light:Why is it said that LED corn light saves energy resources?
What is the effect of LED grow lights on the growth cycle of plants?
Is there any difference between led street lights and landscape lights? Blog

Is there any difference between led street lights and…

What is the difference between street lights and landscape lights?

As a great invention, the lamp has been transformed into the 21st century. The types of lamps have already shown various types. There are many lamps with different heights and thermal efficiency. As led street lights and LED landscape lamps, which are both lighting lamps, they are in the city. It is also very common, but there are many differences between the two. As for the differences between the two, the editor lists 4 levels. Let's discuss it for a while.
They are all lights, but there are also differences between led street lights and LED landscape lights?
1. The aspect ratio is different.
The basic aspect ratio of road lighting is 6-12 meters, and some road lighting has a basic aspect ratio of 6-20 meters. However, the usual aspect ratio of landscape lights is 3-6 meters. This is because the landscape lights are for viewing purposes, so you don’t need to make them too high. The higher you make, the larger the material and the more expensive the project budget.

2. The thermal efficiency of lamps is different.
The thermal efficiency of road lighting lamps is usually relatively large, which will be in the range of 250-400W, and it should be considered based on the total width of the road surface, surrounding plants, the aspect ratio of the light poles, and whether it harms nearby residents.
The thermal efficiency of landscape light fixtures is relatively small, usually 80-150W, but it will also be smaller. This is because the landscape lamp has the basic lamp function, and its greater function is to have a stronger viewing value. Its lamp source thermal efficiency can reflect the overall appearance of the lamp, and it does not need to be too bright.
3. Different venues are used.
Road lighting is usually used in areas such as main roads, secondary roads, commercial squares, residential areas, etc., in cities or rural areas, and the requirements for lamps are usually relatively large.

Landscape lights are usually installed in separate areas, such as public circles, landscapes, high-end apartments, commercial streets, and entertainment business centers. In many tourist areas, landscape lights will also appear in the back.
4. The effect is different.
The most critical function of road lights is also lamps, which must be able to show better chromaticity of lamps for non-motor vehicles and cars. However, the landscape lamp only needs basic lamps and lanterns. The most important thing is the ornamental value, which is used to decorate the surrounding environment and build the atmosphere.
The shape of road lighting is not so diverse, usually just a few types. However, there are many shapes of landscape lights, they are very casual, and they are not restricted. It can be customized according to the surrounding environment and unique reasons.

Want to learn more? please check:

Problems with led lights? Why is the led light not on?
Main characteristics of high power LED lamp
Why is the led corn light brand pure natural and environmentally friendly?